Why we chose this piece

Most wall lights are chosen to fill a gap. This one is chosen because it makes the wall look better.

We looked at a great many brass wall lights before settling on the Jenning, and the thing that separated it was restraint. The proportions are quiet. The backplate is small enough at 13cm by 5.5cm to sit neatly against panelling or a narrow pier of wall without crowding it. The arm is short. The shade does the talking.

It is solid brass rather than brass-effect metal, which matters more than it sounds. Solid brass carries its antique finish with real depth, and it ages rather than wears. Over the years it will darken slightly in the places hands and light reach most, which is exactly what you want from a metal like this.

Why you will love it

The light is soft, not sharp

The fabric shade diffuses the bulb rather than exposing it, so you get a warm wash rather than a hot spot. In a hallway that means a welcoming glow instead of a glare in the eye as you come through the door.

It sits close to the wall

At 18cm deep it projects far less than a swing-arm or a picture light, which makes it genuinely usable in a corridor, beside a door frame, or in the tight run of wall next to a bed.

It works in pairs

Symmetry is where this light earns its place. Two either side of a bed, a fireplace or a mirror, and a plain wall becomes a considered one.

Standard fitting, no fuss

A standard E14 bulb means replacements are easy to find and you can choose your own warmth and brightness rather than being locked into whatever the fitting came with.

The Jenning story

The Jenning belongs to a tradition of English wall lighting that predates the ceiling pendant becoming the default. Before every room had a central light, illumination came from the walls. It sat lower, spread wider, and made rooms feel softer and more human in the evenings.

That is the effect we were after here. A shape that would have looked at home in a Georgian hallway, made in a metal that improves with age, finished so that it feels lived with rather than newly bought. Nothing about the Jenning is trying to be the focal point. It is trying to make the room around it look right.

Size and placement

If you are hanging a pair, allow at least 90cm between centres so the pools of light read as two rather than one.

Materials and craftsmanship

Solid brass frame and arm. Not plated, not brass-coloured steel. The warm antique finish is applied to give the metal an aged softness from the day it arrives, so it never has that showroom shine that dates a room.

Fabric shade. Chosen for the quality of light it gives rather than for pattern. It softens the bulb, warms the tone, and keeps the light flattering to skin, paint and timber.

Wall mounting plate included. The fixing plate is supplied with the light, so your electrician is not sourcing parts on the day.

Small variations in the antique finish are part of how solid brass is made and are not faults. Two lights from the same batch will be siblings rather than twins.

How it compares

Interior styles it suits

Quiet luxury and contemporary classic

Against off-white, mushroom or soft clay walls, the antique brass reads as warmth rather than metal. This is the Jenning at its most natural.

Period and traditional

Panelled hallways, picture rails and older plasterwork suit it particularly well, because the proportions are drawn from that tradition.

Transitional

If your furniture is modern but your building is not, brass wall lighting is one of the easiest ways to bridge the two.

Hospitality and boutique commercial

Corridors, guest rooms and reception areas benefit from the low projection and the soft, repeatable glow of a fitting hung in sequence.

At a glance

Practical information and care

Avoid brass polish and abrasive cleaners. The antique finish is meant to sit softly on the metal, and polishing will lift it back to raw brass. If a mark needs more than a dry cloth, a barely damp cloth followed immediately by a dry one is as far as we would go.

Installation should be carried out by a qualified electrician in line with current wiring regulations. This is an interior fitting and is not suitable for bathrooms zones requiring IP rated lighting, or for outdoor use.

Complete the look

Questions, answered

Buying with confidence

Every Jenning is checked before it leaves us. Allow 10 to 14 days for delivery, and we will keep you updated along the way.

If it arrives and it is not right for the wall you had in mind, get in touch and we will help you sort it. We would rather you had the correct piece than the one you settled for.

If you are buying more than two, or specifying for a hotel, restaurant or project, contact us about trade and bulk pricing before you order.